Ricoh M047 Service Manual page 189

Attack Max Num
Sets a limit on the number of requests received for certification in order to
004
slow down the certification speed when an excessive number of access
attempts have been detected.
User Authentication
These settings should be done with the System Administrator.
5420
These functions are enabled only after the user access feature has
been enabled.
041 Printer
051 SDK1
061 SDK2
071 SDK3
Auth. Error Code
5481
This SP code determines how the authentication failures are displayed.
001 System Log Disp
SM Appendix
CÓPIA NÃO CONTROLADA
[50 to 200 / 200 / 1]
[0 or 1/ 0 / 1] 0: ON. 1: OFF
Determines whether certification is required
before a user can use the printer application.
[0 or 1/ 0 / 1] 0: ON. 1: OFF
Determines whether certification is required
before a user can use the SDK application.
[0 or 1 / 0 / -]
0: OFF [Default], 1: ON
Determines whether an error code appears in the
system log after a user authentication failure occurs.
3-27
CÓPIA NÃO CONTROLADA
SP Tables
M047