Ricoh M047 Service Manual page 154

Service Call Conditions
Code No.
EEPROM error
The EEPROM error is detected at
669 B
reading the prefix of the EEPROM
address after power-on or recovery
from the energy saver mode.
PER-command error
The machine does not receive
687 B
PAPI-PER command for s10
seconds after PAPI-PES has been
issued.
Ready notification error of image
data transmission
The controller does not send a ready
688 B
notification of image data
transmission after a sheet of paper
has stopped at the registration roller.
M047
CÓPIA NÃO CONTROLADA
Symptom
2-6
CÓPIA NÃO CONTROLADA
Possible Cause
EEPROM not installed or
incorrectly installed
EEPROM defective
Controller board defective
Controller board defective
Communication error
SM Appendix