Pausing A Batch; Restarting A Batch - Monarch 9855 Operator's Handbook Manual

P a u s i n g a B a t c h
You can pause printing by pressing Enter/Pause. You may want to interrupt
a batch to make adjustments for:
Loading a different roll of supply or a ribbon. See Chapter 2, "Loading
♦
Supplies" or Chapter 3, "Loading Ribbon" for more information.
Adjusting the supply position or contrast using the Setup menu. See
♦
Chapter 4, "Setting Supply Options" for more information.
When you press Enter/Pause you will see
PAUSE MENU
Print Mode
You can press Enter/Pause to resume printing or press
the Pause Menu options.
The following chart shows the Pause Menu options.
R e s t a r t i n g a B a t c h
You can reprint a paused batch from the beginning (using the original
quantity).
1. When you press Enter/Pause, you will see
PAUSE MENU
Print Mode
2. Press or
PAUSE MENU
Restart Batch
3. Press Enter/Pause. The batch starts printing from the beginning.
Pause Menu
C an c el C an c el
B at c h A ll
until you see
Print R e sta rt
Mode B at c h
or to display
Printing 8-3