Monarch MWS 9878 Specification Sheet

®
Monarch 9878
(Mobile Work Station)

Product Specification

STANDARD FEATURES
Dimensions: Full Size Series
Height – 37" (940 mm)
Width – 20.5" (521 mm)
Length – 39.5" (1003 mm)
Wheelbase – 18" (457 mm)
Weight - 160 lbs. (73 kg)
(Two 55 AH batteries, 300W AC Inverter, charger,
curved handle, laminated wood top, two fixed locking
and two full swivel casters)
Laminated wood top work surface 20"W x 26"L (508
mm x 660 mm)
Lower Shelf – 15"W x 25"L (381 mm x 635 mm)
Battery Power Options:
In-Store Model – 24 VDC, (2) 55 AH
Deep cycle battery, sealed lead-acid, non-venting, no
transportation restrictions
Cycle Use:
100% depth of discharge, approx. 250 cycles
50% depth of discharge, approx.
30% depth of discharge, approx. 1200 cycles
ENVIRONMENT RANGES
Operating Temperature:
40° to 104° F (5° to 40° C)
Storage:
40° to 140° F (5° to 60° C)
Humidity/Operating and Storage:
5% to 90% non-condensing
Electrostatic Discharge and Air Quality:
Some problems with electronic equipment may occur in environments prone to static discharge or extreme dust
conditions. Paxar suggests that you take precautions to minimize these problems.
™ ™
MWS
550 cycles
Cycle life is approximate and many factors affect MWS
battery performance
Battery Status Panel:
Lights - Red, Yellow, and Green
Tone - Battery Low Alert
Charger Input:
115VAC +/-10% (60Hz), 230VAC (50Hz)
IEC Connection
Charger Output:
5 hours "typical" charge time
Reverse polarity and short circuit-proof
Temperature compensated
Smart charging
10-amp peak charging current
Product Warranty:
One (1) year Parts and Labor
Two (2) months On-Site, Ten (10) months Depot
Return
Mobile Work Station (MWS)
for Tabletop Printers
Customizable
Power Management
System
Battery Status Panel