Printing Truetype® Fonts - Monarch 9855 Operator's Handbook Manual

P r i n t i n g T r u e T y p e ® F o n t s
TrueType® fonts are available on this printer. TrueType fonts are scalable
and the characters print smoothly, without the jagged edges you see on
bitmap fonts. When downloading a TrueType font, you download the entire
font. You cannot specify a subset (particular characters or point size) of the
font.
Note: These font files may be very large and image slower than bitmap
fonts. The size of the font file, in bytes, is the minimum amount of
memory you must have available for fonts in the printer's memory.
Your System Administrator may need to reconfigure the printer's memory to
use downloaded TrueType fonts. Refer to the optional Packet Reference
Manual (available on our Web site) to learn how to reconfigure the printer's
memory. After reconfiguring memory, resend the font, format, and batch
packets.
This printer can accept a TrueType font file that has been converted to Hex
or Run-Length encoding using the version of Font Utility. Font Utility is
available on our Web site (www.paxar.com). Font Utility is a part of the
Monarch MPCL Toolbox Utilities. You can also use a wide variety of Code
Pages with International (Turkish, Latin, Spanish, etc.) characters. Using
TrueType fonts allows you a greater range of fonts for your formats.
TrueType fonts are designed to be regionally specific; therefore, all Code
Pages may not be supported in a given font. Check with your System
Administrator if you need to use TrueType fonts.
8-8 Operator's Handbook