No Image Errors - Monarch 9855 Operator's Handbook Manual

N o I m a g e E r r o r s
With version 5.2 or greater software, you can disable image error reporting.
Image errors occur when there is a problem producing a complete label.
You must press Escape/Clear to clear an image error.
Image errors include
600 unable to image batch
601 problem during imaging
603 missing batch
611 invalid font, bar code or density
612 missing batch data
613 reference point off label
Note: With this option enabled, the format may not print as expected and
no error is reported. For example, bar codes require a non-print
zone and if a bar code is placed too close to the edge of the label,
no error is reported and the bar code may not scan properly.
Error 616 (bar code dot shifting failed) is always reported.
To change the setting, from the Main Menu, select Setup, then Defaults.
Then, follow these steps.
1. Press or
DEFAULTS
No Image Error
2. Press Enter/Pause. The current setting is displayed, for example:

NO IMAGE ERRORS

Disabled
3. Press or
Enter/Pause.
4. Press Escape/Clear until you see the Main Menu.
6-8 Operator's Handbook
until you see
until you see the option you need. Then press
614 portion of field off label
615 invalid PDF417 bar code data
618 invalid font size
620 missing font data
621 invalid downloaded font
622 not enough font memory