Monarch 9855 Operator's Handbook Manual page 55

E r r o r A c t i o n
The recovery action from an error condition is in the Setup, Supply Menu.
You can change how the printer responds to a bad scan. The choices
include normal and overstrike/continue one to five consecutive bad scans.
The overstrike pattern is created to prevent someone from using a bad label.
Selecting overstrike and continue 1x-5x sets the number of times the printer
prints an overstrike pattern on consecutively bad labels before generating an
error. The user must clear the error before operation can continue.
Do not use the overstrike action with
Peel mode
♦
Linerless supplies
♦
♦ String tag supplies
For more information about the error actions, see the following table.
Error Action
Overstrike/Continue 1-5
Normal (no overstrike)
Standard
Peel with Peel
No
Yes
Verifier RFID with
No
Yes
Setting Supply Options 4-17
Peel
No
Yes