Error Action - Monarch 9855 Operator's Handbook Manual

To change the setting, from the Main Menu, select Setup, then Supply. Then
follow these steps.
1. Press or
SUPPLY

Error Action

2. Press Enter/Pause. The current setting is displayed, for example:
ERROR ACTION
Ostrk/Cont 1x
3. Press or
want, press Enter/Pause.
4. Press Escape/Clear until you see the Main Menu.
Note: Depending on the selected error action, you may or may not see a
label with the overstrike pattern.
Label w ith o verstrike pattern
until you see
to see the other options. After you display the option you
Setting Supply Options 4-19