Using String Tag Supply; String Tag Considerations - Monarch 9855 Operator's Handbook Manual

9. Close the exit cover.
10. Load supplies by following the label loading procedures. You may notice
a different color and texture on the platen roller. Linerless supplies do
not stick to the textured platen roller.
11. Close the printhead assembly and the cover.
12. Turn on the printer.
13. Verify the alignment of the platen roller with the peel bar or shelf. Press
Feed/Cut to position the supply under the printhead.
14. Once linerless supply is loaded, slightly loosen the supply roll holders
from the edges of the supply roll. This allows linerless supplies to track
better.
U s i n g S t r i n g T a g S u p p l y
String tags are used in a variety of applications, such as jewelry tags and
item marking.

String Tag Considerations

♦ Thermal direct printing, fan-fold supplies, and the knife are not supported
with string tags.
The maximum print speed with string tags is 6.0 inches per second (ips).
♦
♦ A non-print zone of 0.250 inches (6.4 mm) exists on the string side of the
tag.
Use the wide setting for string tags.
♦
Loading Supplies 2-13