Pausing A Batch; Restarting A Batch - Monarch 9855 Operator's Handbook Manual

P a u s i n g a B a t c h
You can pause printing by pressing Enter/Pause. You may want to interrupt
a batch to make adjustments for:

Loading a different roll of supply or a ribbon. See Chapter 2,
Supplies" or Chapter 3,

Adjusting the supply position or contrast using the Setup menu. See
Chapter 4, "Setting Supply
When you press Enter/Pause you will see
PAUSE MENU
 Print Mode
You can press Enter/Pause to resume printing or press  or  to display
the Pause Menu options.
The following chart shows the Pause Menu options.
R e s t a r t i n g a B a t c h
You can reprint a paused batch from the beginning (using the original
quantity).
1. When you press Enter/Pause, you will see
PAUSE MENU
 Print Mode
2. Press  or  until you see
PAUSE MENU
 Restart Batch
3. Press Enter/Pause. The batch starts printing from the beginning.
"Loading
Options" for more information.

Pause Menu
Canc el Canc el
B a tch All


Ribbon" for more information.
Prin t Restart
Mode B a tch
"Loading
Printing 8-3