Fuses; Before Changing; Compartment; Important Safety Notes - Mercedes-Benz SL Operator's Manual

Fuses

Important safety notes

G
WARNING
Only use fuses that have been approved for
Mercedes-Benz vehicles and that have the
correct fuse rating for the systems
concerned. Do not attempt to repair or bridge
faulty fuses. Using fuses that have not been
approved or attempting to repair or bridge
faulty fuses could cause the fuse to be
overloaded and result in a fire. Have the cause
traced and rectified at a qualified specialist
workshop.
! Only use fuses that have been approved
for Mercedes-Benz vehicles and which
have the correct fuse rating for the system
concerned. Otherwise, components or
systems could be damaged.
The fuses in your vehicle serve to close down
faulty circuits. If a fuse blows, all the
components on the circuit and their functions
stop operating.
Blown fuses must be replaced with fuses of
the same rating, which you can recognize by
the color and value. The fuse ratings are listed
in the fuse allocation chart.
If a newly inserted fuse also blows, have the
cause traced and rectified at a qualified
specialist workshop, e.g. an authorized
Mercedes-Benz Center.
Before changing a fuse
X
Secure the vehicle against rolling away
( Y page 154).
X
Switch off all electrical consumers.
X
Turn the key to position 0 in the ignition
lock and remove it (
vehicles with KEYLESS-GO, make sure the
ignition is switched off (
indicator lamps in the instrument cluster
must be off.
Y page 135). On
Y page 135). All
The fuses are located in various fuse boxes:
fuse box in the engine compartment on the
R
right-hand side of the vehicle, when viewed
in the direction of travel
Dashboard fuse box
R
Fuse box in the rear
R
The fuse allocation chart is located in the
vehicle tool kit ( Y page 508).
Fuse box in the engine compartment
! Make sure that no moisture can enter the
fuse box when the cover is open.
! When closing the cover, make sure that it
is lying correctly on the fuse box. Moisture
seeping in or dirt could otherwise impair
the operation of the fuses.
X
Open the hood ( Y page 496).
X
Remove any existing moisture from the
fuse box using a dry cloth.
X
To open: open clamps ;.
X
Fold cover : upwards in the direction of
the arrow and remove it.
Fuses
521
Z