List Of Areas - Mercedes-Benz SL Operator's Manual

Navigation
350
Destination memory (
R
List of categories for personal POIs
R
( Y page 319)
X
Select the desired destination or personal
POI and press W to confirm.
X
When the destination address is displayed,
Continue
select
The map appears.
The crosshair marks the center of the area
that is to be avoided.
X
To scroll the map: slide XVY, ZVÆ or
aVb the COMAND controller.
X
To set the map scale: as soon as you turn
cVd the COMAND controller, the scale bar
appears. Turning clockwise zooms out from
the map; turning counter-clockwise zooms
in.
X
Turn cVd until the desired scale is set.
X
To apply a block: press W the COMAND
controller.
A red square appears on the map.
X
To adjust the size of the square: turn
cVd the COMAND controller.
The square is enlarged or reduced.
X
To confirm the settings: press W.
The list appears. The previously selected
area to be avoided has been added and
activated.
X
Follow the steps described in the "Defining
further areas" section (
Y
page 304)
and press W to confirm.
Y page 350).
Defining further areas
Calling up the list of areas
X
To switch on navigation mode: press the
Ø function button.
X
To show the menu: press W the COMAND
controller.
X
Navi
Select in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X
Avoid Area
Select
confirm.
If you have already selected one or more
areas to avoid, a list of areas appears.
Example: list of areas
i Available positions in the list are named
Empty
and are shown in gray.
X
Avoid New Area
Select
the COMAND controller and press W to
confirm.
A menu appears.
and press W to
by turning cVd