Display - Mercedes-Benz SL Operator's Manual

Using KEYLESS-GO:
make sure that the ignition is switched on.
R
when the vehicle is stationary, depress the
R
brake pedal and keep it depressed.
engage park position P.
R
release the brake pedal.
R
remove the Start/Stop button from the
R
ignition lock.
insert the SmartKey into the ignition lock.
R
switch on the ignition.
R
depress the brake pedal and keep it
R
depressed.
shift to neutral N.
R
release the brake pedal.
R
if the electric parking brake is applied,
R
release it.
switch off the ignition and leave the
R
SmartKey in the ignition lock.
Shifting to transmission position D
X
When the vehicle is stationary, depress the
brake pedal.
X
Push the selector lever back past the first
point of resistance.
i If the vehicle is braked to a standstill when
in transmission position D(
the brake pedal continues to be depressed,
the ECO start/stop function switches the
engine off automatically.
Transmission position and drive
program display
Display in transmission positions P, R
and N
:
;
In addition to drive program ; being shown
in the multifunction display, the currently
selected drive program is indicated in red on
the program selector button.
Display when in transmission position
D
Y page 138) and
:
;
=
If you have restricted the shift range, the
selected shift range and gear, e.g. D4, are
shown at position :.
Automatic transmission
Transmission position: currently selected
transmission position will be highlighted
Drive program (E/S/M)
Transmission position
Gear
Drive program (E/S)
145
Z