Function Restrictions; Switching To - Mercedes-Benz SL Operator's Manual

Video
454
COMAND is capable of playing back video
DVDs produced according to the following
standards:
region code 1 or region code 0 (no region
R
code)
PAL or NTSC standard
R
You will generally find the relevant details
either on the DVD itself or on the DVD case.
i If you insert a video DVD with a different
region code, you will see a message to this
effect.
i
COMAND is set to region code 1 at the
factory. This setting can be changed at an
authorized Mercedes-Benz Center. This will
allow you to play video DVDs with a
different region code, provided that they
are produced in accordance with the PAL
or NTSC standard. The region code can be
changed up to five times.

Function restrictions

Depending on the DVD, it is possible that
certain functions or actions will be
temporarily blocked or may not function at all.
As soon as you try to activate these functions
or actions, you will see the K symbol in the
display.
Inserting and removing DVDs
X
Proceed as described in the "Inserting and
ejecting CDs and DVDs" section
( Y page 421).
Switching to video DVD mode
Option 1
X
Single DVD drive: insert a video DVD.
COMAND loads the medium inserted and
starts to play it.
X
DVD changer: insert a video DVD.
X
Press h.
or
X
Press the % back button.
COMAND loads the medium inserted and
starts to play it.
Option 2
X
Press the h function button one or more
times.
COMAND switches to the previous disc
operating mode.
By pressing the function button repeatedly,
you can change the operating mode in the
following order:
audio CD/DVD / video DVD/MP3 in the
R
DVD changer or DVD single drive (disc
mode)
audio CD/DVD, video DVD or MP3 disc in
the DVD changer
memory card mode
R
MUSIC REGISTER
R
USB storage device
R
Media Interface or audio AUX mode
R
®
Bluetooth audio mode
R
X
DVD changer: select
sliding VÆ and turning cVd the COMAND
controller and press W to confirm.
Single DVD drive: select
VÆ and turning cVd the COMAND
controller and press W to confirm.
X
Select a ý video DVD from the media list
( Y page 456).
Option 3
X
Video
Select in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
Video DVD mode is switched on.
Hiding/showing the navigation menu
This function is not available while the DVD's
Y
own menu ( page 457) is being displayed.
Media Changer
or by
Media
by sliding