Setting; Date; Time - Mercedes-Benz SL Operator's Manual

X
Y
Select the seat (
X
Select Reset All
COMAND controller and press W to
confirm.
A query appears.
X
Yes No
Select or and press W to confirm.
If you select No, the process will be
canceled.
After you select Yes, all seat adjustments
are reset to the default values (factory

setting).

System settings
Display settings
Setting the brightness
The brightness detected by the display light
sensor affects the setting options for this
function.
X
Press W.
X
Settings
Select by turning cVd the
COMAND controller and press W to
confirm.
X
Display
Select and press W to confirm.
X
Brightness
Select
confirm.
X
Adjust the brightness by turning cVd the
COMAND controller and press W to
confirm.
page 286).
by turning cVd the
and press W to
Display design
Your COMAND display features optimized
designs for operation during daytime and
night-time hours. You can set the design by
manually selecting day or night design or opt
for an automatic setting.
X
Press W.
X
Settings
Select by turning cVd the
COMAND controller and press W to
confirm.
X
Display
Select and press W to confirm.
X
Day Mode, Night Mode
Select
Automatic
by turning cVd the COMAND
controller and press W to confirm.
A dot indicates the current setting.
Design Explanation
Day Mode The display is set
permanently to day
design.
Night Mode
The display is set
permanently to night
design.
Automatic
If the
is selected, COMAND
evaluates the readings
from the automatic
vehicle light sensor and
automatically switches
between the display
designs.
Time settings
General information
If COMAND is equipped with a navigation
system and has GPS reception, COMAND
automatically sets the time and date. You can
also adjust the time yourself in 30-minute
increments, but the date cannot be changed.
i If you set the time in 30-minute
increments, any time zone settings and
settings for changing between summer and
System settings
or
Automatic
setting
289
Z