Using The Telephone; Calling Up; Introduction - Mercedes-Benz SL Operator's Manual

Telephone
378
X
Delete
Select
A deletion prompt appears.
X
Yes
Select or
If you select Yes, the text message is
deleted.
If you select No, the process will be aborted.
i
This delete function is not supported by
all mobile phones. The
message appears.
Using the address book

Introduction

G
WARNING
Always focus your attention on the traffic
conditions.
Before starting the journey, familiarize
yourself with the address book functions.
Only use COMAND if road and traffic
conditions permit. You could otherwise
become involved in an accident in which you
or others could be injured.
The address book organizes and stores
entries which are entered from different
sources (mobile phone, memory card, USB
storage device, COMAND telephone book,
navigation system).
You can use these entries to make telephone
calls and for navigation.
i Number of contacts in the address
book: the address book can store a total of
4000 contacts.
1500 entries each are reserved in the
address book for:
contacts from the mobile phone
R
contacts that you create in COMAND or
R
import from other sources
The remaining 1,000 entries are assigned
by COMAND as necessary.
i Display of mobile phone contacts:
contacts downloaded from the mobile
phone remain in the address book even if
and press W to confirm.
No
and press W to confirm.
Delete failed
you disconnect the mobile phone from
COMAND. Contacts that have previously
been available can be displayed as soon as
the mobile phone is reconnected.
COMAND downloads the contacts again so
that any new contacts that have been
added to the mobile phone can be
displayed.
Once you connect a new mobile phone to
COMAND, all contacts in the address book
from the previous mobile phone are
replaced by those from the new mobile
phone.
Address book entries remain stored when
the mobile phone is disconnected. For this
reason, delete your personal data using the
reset function before selling your vehicle,
Y
for example ( page 294).
Calling up the address book
Using the function button:
X
Press the % function button.
You see either the telephone basic menu or
the address book, depending on which was
last active.
X
If the telephone basic menu is displayed,
press the % function button again.
Using the telephone basic menu:
X
With the telephone basic menu shown,
Phone
select by sliding VZ the COMAND
controller and press W to confirm.
X
Address Book
Select
press W to confirm.
from the menu and