Accepting A Call; Number From The Phone Book; Redialing - Mercedes-Benz SL Operator's Manual

X
Switch on the mobile phone (see the
separate operating instructions).
X
Switch on COMAND (
X
Establish a Bluetooth
COMAND ( Y page 358).
X
Press the = or ; button on the
steering wheel to select the
You will see one of the following display
messages in the multifunction display:
Phone READY
or the name of the network
R
provider: the mobile phone has found a
network and is ready to receive.
Phone No Service: there is no network
R
available or the mobile phone is searching
for a network.

Accepting a call

Example: incoming call
X
Press the 6 button on the steering
wheel to accept an incoming call.
If someone calls you when you are in the
Tel
menu, a display message appears in the
multifunction display.
You can accept a call even if you are not in
Tel
the menu.
Rejecting or ending a call
X
Press the ~ button on the steering
wheel.
You can end or reject a call even if you are not
Tel
in the menu.
Y page 275).
®
connection to
Tel
menu.
Menus and submenus
Dialing a number from the phone book
X
Press the = or ; button on the
steering wheel to select the
X
Press the 9, : or a button to call
up the phone book.
X
Press the 9 or : button to select the
desired name.
or
X
To begin rapid scrolling: press and hold
the 9 or : button for longer than
one second.
Rapid scrolling stops when you release the
button or reach the end of the list.
X
If only one telephone number is stored
for a name: press the 6 or a button
to start dialing.
or
X
If there is more than one number for a
particular name: press the 6 or a
button to display the numbers.
X
Press the 9 or : button to select the
number you want to dial.
X
Press the 6 or a button to start
dialing.
or
X
To exit the telephone book: press the
~ or % button.

Redialing

The on-board computer saves the last names
or numbers dialed in the redial memory.
X
Press the = or ; button on the
steering wheel to select the
X
Press the 6 button to switch to the
redial memory.
X
Press the 9 or : button to select the
desired name or number.
X
Press the 6 or a button to start
dialing.
or
X
To exit the redial memory: press the
~ or % button.
213
Tel
menu.
Tel
menu.
Z