Autostore; Storing Stations - Mercedes-Benz SL Operator's Manual

Audio
414
Waveband
AM (MF)
FM (VHF)
WB (Weather Band)
i You can only enter currently permitted
numbers.
i If you enter a frequency in the FM or AM
wavebands which is outside the frequency
range, COMAND sets the next lower
frequency.
Storing a station
Storing stations manually
There are ten presets available for the FM and
AM wavebands.
Example: station memory
X
Quick save: press and hold a number key,
e.g. l, until you hear a tone.
The station is stored.
X
Directly in the station presets: when the
display/selection window is active, press
W the COMAND controller.
or
X
Presets
Select
cVd the COMAND controller and press
W to confirm.
In both cases, the station presets appear.
The # dot indicates under which preset
the currently selected station is stored.
Frequency
530 – 1700 kHz
87.7 – 107.9 MHz
Weather report
channels
by sliding VÆ and turning
X
Select a preset by turning cVd the
COMAND controller and press and hold
W until you hear a tone.
The station is stored under the preset.
Storing stations automatically
This function automatically stores stations
with adequate reception under the presets.
The search starts at the lowest frequency.
COMAND stores any stations found,
beginning with preset 1. When the highest
frequency is reached or 10 stations have
been found, the storing process ends. Any
stations stored manually under the presets
will be lost. COMAND may not occupy all
memory positions when storing.
X
Option 1: when the display/selection
window is active, press W the COMAND
controller.
The station preset memory appears.
X
Option 2: select Presets
and turning cVd the COMAND controller
and press W to confirm.
The station preset memory appears.
X
Irrespective of the option, select

Autostore

and press W to confirm.
In both cases, COMAND searches for
stations that can be received. You will see
a message to this effect. The available
stations are automatically stored in the
preset positions.
X
To cancel storing: select
press W to confirm.
Weather Band
Activating
X
Press the $ function button repeatedly
until the Weather Band is switched on.
or
X
Select the currently set waveband
AM
by sliding VÆ and turning cVd the
by sliding VÆ
Cancel
and
FM
or