External Authorization - Mercedes-Benz SL Operator's Manual

i Mercedes-Benz recommends de-
authorization in COMAND and on the
mobile phone ( Y page 362). Subsequent
authorization may otherwise fail.
X
To enter a passkey in COMAND: press
the number keys in turn.
or
X
Select the digits in the digit bar one by one
by turning cVd the COMAND controller
and pressing W to confirm.
¬ is highlighted after the first number
has been entered.
X
In both cases, select ¬ and press W to
confirm.
X
To enter the passkey on the mobile
phone: if the Bluetooth
successful, you will be requested to enter
the passkey (access code, passkey; see the
mobile phone operating instructions).
X
Enter the same passkey in the mobile
phone as the one already entered in
COMAND.
Connecting Bluetooth
The message
Profiles...
appears.
Authorization successful
The
message appears once authorization is
completed.
The mobile phone is authorized and
connected to COMAND. You can now make
phone calls using the COMAND hands-free
system.
i
After entering the passkey, you may also
need to enter a confirmation in your mobile
phone to connect calls. Please check your
mobile phone display. On some mobile
phones, this confirmation can be saved. In
this case, you do not need to enter it again.
If the COMAND display shows the
Authorization failed
may have exceeded the prescribed time
period. Repeat the procedure.
®
connection is
message, you
Option 2: use Secure Simple Pairing
The mobile phone (or the Bluetooth
device) must support the Bluetooth
2.1 for connection via Secure Simple Pairing.
COMAND creates a six-digit code, which is
displayed on both devices that are to be
connected.
X
If the code is the same on both devices,
confirm Yes by pressing W.
If you select Yes, authorization is continued
and the mobile phone is connected.
If you select No, the process will be
canceled.
X
Confirm the message on the mobile phone.

External authorization

If COMAND does not detect your mobile
phone, this may be due to particular security
settings on your mobile phone. In this case,
you can test if your mobile phone can find
COMAND. The Bluetooth
Bluetooth".
COMAND is "MB
Please note the following: some mobile
phones require that you establish the
Telephone
®
audio
®
version
®
device name of
Z
361