Changing The Character Set; Changing The Language - Mercedes-Benz SL Operator's Manual

At a glance
282
Other input menu functions:
to delete a character/entry (
R
to switch between upper/lower-case
R
letters ( Y page 282)
to change the character set (
R
to move the cursor in the data field
R
( Y page 283)
X
To enter a phone number: select the
digits one by one in the corresponding data
field by turning cVd and sliding ZVÆ the
COMAND controller and press W to
confirm.
Switching data fields
Cursor in the next data field
:
To store an entry
;
4 and 5 symbols to select a data field
=
In the input menu, if you want to enter a first
name after you have entered a surname, for
example, proceed as follows to switch
between the data fields:
Option 1
X
Select 4 or 5 in the character bar and
press W to confirm.
The input menu shows the data field
selected.
Option 2
X
Slide ZV the COMAND controller
repeatedly until the character bar
disappears.
X
Select the data field by sliding ZVÆ and
press W to confirm.
Storing an entry
Y page 283)
X
After making an entry in the input menu
Y
(
the character bar by turning cVd the
COMAND controller and press W to
Y page 282)
confirm.
The entry is stored in the address book.
Further functions available in the
character bar
Changing the language of the character
bar
While making an entry in the input menu
( Y page 370):
X
Select B and press W to confirm.
X
Select the language by turning cVd the
COMAND controller and press W to
confirm.
Switching the character bar to letters
While making an entry in the input menu
( Y page 370):
X
Select the * (upper case) or E
(lower case) symbol and press W to
confirm.

Changing the character set

While making an entry in the input menu
( Y page 370):
X
Select the p symbol and press W to
confirm.
ABC
R
123
R
Other
R
etc.)
page 370): select the ¬ symbol in
(upper/lower case)
(digits)
(special characters such as @, €,