Ending Drying Program; Door Opened - Asko DC7784HP.W.AU User Manual

END OF PROGRAM
■
When the cool-down period has ended, the drying process is fi nished, and the
display shows the text
When the START/STOP button is then pressed, the current program ends and the
display shows the last used program.
PLEASE NOTE
In standby mode the display goes off
after 10 minutes and lights up when
any of the buttons on the control panel
is activated or the door is opened.

ENDING DRYING PROGRAM

To interrupt a drying process in progress, press START/STOP.

DOOR OPENED

If the door is opened while the drying process is in progress, the drying process will
continue for another 5 minutes. The display shows
the 5 minute program pause period.
If the door is closed within this 5 minute period, the drying process will continue.
If the door is left open, the drying process will stop after 5 minutes and must be
restarted manually.
If you wish to stop the drying process immediately, without a 5 minute period, press
START/STOP.
24
859149au_en.indd 24 859149au_en.indd 24
"end"
(fl ashing).
PLEASE NOTE
Empty the condensation water tank
after each drying process.
"close door"
and counts down
17. 02. 2022 08:51:25 17. 02. 2022 08:51:25