Message Alert Tone - AT&T DAL75121 Complete User's Manual

Answering system
Answering system settings

Message alert tone

When the message alert tone is set to On, and there is at least one new
message, the telephone base beeps every 10 seconds. The tone stops when all
new messages have been reviewed. By default, the message alert tone is Off.
To turn on or off the message alert tone:
MENU/
1. Press
or
2. Press CID
/SELECT
MENU
or
3. Press CID
/SELECT
MENU
or
4. Press CID
/SELECT
MENU
or
5. Press CID
/SELECT.
MENU
Notes:
To temporarily turn off the message alert tone, see page 115.
f
The message alert tone beeps only if all the following conditions are met.
f
–
Answering system is on.
–
Message alert tone setting is on.
–
There are new messages.
in idle mode.
SELECT
to highlight Answering sys, then press
.
to highlight Ans sys setup, then press
.
to highlight Msg alert tone, then press
.
to choose On or Off, then press
111
Msg alert tone
ECO
Off
ECO