Message Alert Tone - AT&T BL102-4S Complete User's Manual

Answering system
Answering system settings

Message alert tone

When the message alert tone is set to On, and there is at least one new
message, the telephone base beeps every 10 seconds. Unless you change it,
the message alert tone is set to off.
There is no audible alert at the handset.
To change the setting:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press q or p
CID
/SELECT.
MENU
3. Press q or p
CID
/SELECT.
MENU
4. Press q or p
CID
/SELECT.
MENU
5. Press q or p
CID
/SELECT to save the setting.
6. Press
MENU
NOTES:
The message alert tone beeps only if all the following conditions are met:
f
- Answering system is on.
- Message alert tone setting is on.
- There are new messages.
To temporarily turn off the message alert tone, see page 79.
f
to scroll to Answering sys, then press
DIR
to scroll to Ans sys setup, then press
DIR
to scroll to Msg alert tone, then press
DIR
to choose On or Off.
DIR
SELECT
76
to
Msg alert tone
ECO
On
ECO