Settings You Can Change With User Tools; General Features - Ricoh Aficio 2228C Operating Instructions Manual

Settings You Can Change with User Tools

Reference
To access User Tools, see p.48 "Accessing User Tools (System Settings)".

General Features

❖ ❖ ❖ ❖ Panel Tone
The beeper (key tone) sounds when a key is pressed.
Note
❒ Default: ON
❖ ❖ ❖ ❖ Warm Up Notice (copier/Document Server)
You can set the beeper to sound when the machine becomes ready to copy af-
ter switching out of Energy Saver mode, or when the power is turned on.
Note
❒ If the Panel Tone setting is "OFF", the beeper does not sound, regardless
of the Warm Up Notice setting.
❒ Default: ON
❖ ❖ ❖ ❖ Copy Count Display (copier/Document Server)
The copy counter can be set to show the number of copies made (count up) or
the number of copies yet to be made (count down).
Note
❒ Default: Up (count up)
❖ ❖ ❖ ❖ Function Priority
You can specify the mode to be displayed immediately after the operation
switch is turned on, or when System Reset mode is turned on.
Note
❒ Default: Copier
❖ ❖ ❖ ❖ Print Priority
Print Priority is given to the mode selected.
Reference
p.27 "Multi-Access"
Note
❒ Default: Display mode
❒ When [Interleave] is selected, the current print job will be interrupted after
a maximum of five sheets.
Settings You Can Change with User Tools
4
49