Table of Contents
Advertisement
Troubleshooting
Problem
The main power indicator
continues blinking and
does not turn off when
pressed.
"
Self checking.
"
Colour is being
adjusted.
5
Original images are print-
ed on the reverse side of
the paper.
Misfeeds occur frequently.
An error message remains,
even if misfed paper is re-
moved.
Cannot print in duplex
mode.
You forgot your key opera-
tor code
102
Causes
This occurs in the follow-
ing cases:
• The exposure glass cov-
er or the ADF is open.
• The machine is commu-
nicating with external
equipment.
• The hard disk is active.
The machine is preforming
",
image adjustment opera-
tions.
" appears.
You may have loaded the
paper incorrectly.
The tray's side guides may
not be locked.
The tray's end guide may
not be set properly.
You may have loaded pa-
per of a size not shown on
the paper size selector.
When a misfeed message
appears, it remains until
you open and close the cov-
er as required.
You cannot use paper in
the bypass tray for duplex
printing.
[1 Sided Copy] is selected for
Paper Type: Tray 1-4.
Solutions
Close the exposure glass cover or
ADF, and check if the machine com-
municating with a computer.
The machine may perform periodic
maintenance during operations. The
frequency and duration of mainte-
nance depends on the humidity,
temperature, and printing factors
such as number of prints, paper
size, and paper type. Wait for the
machine to get ready.
Load paper correctly. Load paper
into Tray 1-4 with the print side up,
and into the LCT or bypass tray
with the print side down. See p.107
"Orientation-Fixed Paper or Two-
Sided Paper".
Check the side guides are locked.
See p.120 "Changing the Paper
Size".
Check the end guide is set properly.
See p.120 "Changing the Paper
Size".
When using paper of a size that can-
not be detected automatically, use
Tray Paper Settings to set the paper
size. See p.53 "Tray Paper Size:Tray
2–4" and p.169 "Copy Paper".
Clear misfed paper, and then open
and close the front cover. See p.111
"xClearing Misfeeds".
For duplex printing, select Tray 1-4
in copier mode or with the printer
driver.
Select [2 Sided Copy] for Paper Type:
Tray 1-4. See p.53 "Paper Type:
Tray 1–4"
—
Contact your service representative.
Advertisement
Table of Contents
