Table of Contents
Advertisement
❖ ❖ ❖ ❖ Tray Paper Size:Tray 2–4
Select the size of the paper loaded in the paper tray.
Note
❒ Tray 1 uses A4Kpaper exclusively. You cannot specify any other paper
size.
❖ ❖ ❖ ❖ The paper sizes you can set for trays are as follows:
• Auto Detect, A3L, B4 JISL, A4K, A4L, A5K
• 11"×17"L, 8
1
8
/
"×13"L, 7
4
Important
❒ If the specified paper size differs from the actual size of the paper loaded
in the paper tray, a misfeed might occur because the correct paper size was
not detected.
Note
❒ The paper guide for the optional LCT is fixed for A4K, 8
paper. Contact your service representative if you need to change the paper
size.
❒ Default:
• Tray 2: Auto Detect
• Tray 3: Auto Detect
• Tray 4: Auto Detect
Reference
p.120 "Changing the Paper Size"
❖ ❖ ❖ ❖ Paper Type: Bypass tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
❖ ❖ ❖ ❖ The paper types you can set for the bypass tray are as follows:
• No Display, Recycled Paper, Special Paper, Colour Paper, Letterhead,
Preprinted Paper, Thick Paper, OHP, Plain: Dup.Back, Thick: Dup.Back
Note
❒ Default: No display
❖ ❖ ❖ ❖ Paper Type: Tray 1–4
Sets the display so you can see what type of paper is loaded in each paper
tray. The print function uses this information to automatically select the pa-
per tray.
❖ ❖ ❖ ❖ The paper types you can set for trays are as follows:
• No Display, Recycled Paper, Special Paper, Colour Paper, Letterhead,
Preprinted Paper
1
1
/
"×14"L, 8
/
"×11"K, 8
2
2
1
1
/
"×10
/
"L
4
2
Settings You Can Change with User Tools
1
/
"×11"L, 8"×13"L, 8
2
1
/
1
/
"×13"L,
2
4
"×11"K size
2
53
Advertisement
Table of Contents
