Features - Akai S3000XL User Manual

INTRODUCTION

FEATURES

• Polyphony
• A-D Conversion
• Internal processing
• D-A Conversion
• Sampling rates
• Phase locked stereo sampling and playback
• Internal memory
• Sampling times
• Inputs
• Outputs
• Display
• Digital I/O
• Effects
• DSP Functions
• Filters
• Envelopes
• LFOs
• Legato mode
• Portamento
• Sound library
Page 2
32 voices
16-bit stereo with 64-times oversampling
28-bit accumulation
18-bit with 8-times oversampling
44.1kHz/22.050kHz
2Mbytes standard, expandable to 32Mbytes using SIMMs
2Mbytes 24 seconds mono @ 44.1kHz
32Mbytes 5.94 minutes mono @ 44.1kHz
(Halve these times for stereo sampling)
L/Mono and R jack inputs
L/R stereo jack outputs
8 assignable individual outputs
Stereo headphone jack output
40 x 6 character backlit LCD with graphic waveform editing.
SPDIF digital audio input/output on RCA phonos.
Optional 4-channel multi-effects processor offering two
channels of simultaneous distortion, three-band EQ, ring
modulation, modulation (chorus, phase shift, flanging,
pitch shift, autopan or rotary speaker), stereo delay and
reverb plus two 'spare' channels of reverb (four reverb
processors in total).
Timestretch, re-sampling and digital EQ.
2-pole (12dB/Octave) resonant lowpass per voice.
Optional IB304F offers a 2nd bank of 2-pole resonant
multi-mode (HP, BP, LP, EQ) filters and tone control.
1 x ADSR and 1 x multi-stage envelope generator (an
extra multi-stage envelope is added with the installation of
the IB304F).
2 x multi-wave low frequency oscillators (triangle, square,
sawtooth and random waves).
Single trigger playback to emulate old monophonic synths
and solo instruments' playing styles.
Polyphonic and monophonic portamento.
Fully compatible with Akai S900, S950, S1000, S1100,
S2800, S3000, S3200, S2000 and S3200XL samplers.
S3000XL Operator's Manual