Effects Output Section - Akai S3000XL User Manual

EFFECTS EDIT

EFFECTS OUTPUT SECTION

The multi-effects section is laid out thus:
DIST/EQ
You have control over the distortion/EQ section's level and pan, the modulation/echo
section's output level and pan/balance and the reverb section's output level and
pan/balance.
These are made available on the FX PATH & OUTPUT page:
sets the output level for the sections denoted to the left of the fields and
pan position/balance of these effects. The
MOD/ECHO effects. 00 sets that the effects will be mono (i.e. the left and right channel
will be summed as a mono signal) and 99 sets that the output of this effects section will
be stereo.
NOTE: The
want a wide stereo image. For example, you may wish to add chorus to a bass sound but
you may not want this sound to spread over the stereo image and dominate the mix. In
this case, set
effect so that it doesn't occupy a wide image in the stereo mix.
Page 198
MOD FX
control can be useful when you want to use a chorus type effect but don't
to 00 - this will give you the full effect of the chorus but will 'monofy' the
DELAY REVERB
LVL
LVL
(width) control sets the 'stereoness' of the
LVL
PAN
PAN
PAN
L/R OUT
sets the
S3000XL Operator's Manual