Akai S3000XL User Manual page 158

EDIT SAMPLE
If you do not name a new sample, you will receive the following prompt when you press
:
Pressing GO will take you directly to the
as you wish. If you change your mind, press
Whilst the S3000XL is processing the data, you will receive a 'busy' prompt. After a few
seconds, the new sample will be shown which may be played in the usual way.
Page 152
This is an 'extract' function that will remove the isolated area and copy it
across to the new sample. I.e:
This is particularly useful for isolating such things as single snare or bass
drums from a pattern although any sound could be 'lifted' in this way.
This allows you cut the section you have marked and keep the gap thus
created. I.e:
This is good for removing offending noises from a track where the rhythm
or pace should be retained. For example, in a vocal line where the singer
accidentally knocked the mic stand or sneezed!
This will remove the selected area and close the gap thus created. I.e.:
This is good where you want to remove something but the rhythm or the
pace is not so important.
prompt and you may
.
S3000XL Operator's Manual
, or