Deleting Programs - Akai S3000XL User Manual

SINGLE MODE

DELETING PROGRAMS

Programs and their associated samples may be deleted from memory in this page, which
is accessed by pressing the
When this page is displayed, the cursor will highlight a program. Highlight the program
you want to delete using the CURSOR keys. There are three soft key actions that you
can take, all concerned with deleting programs:
NOTE: If you delete a program from memory, make sure that you really do not need that
program in the future or that you have saved it to disk first. In some cases, as explained
below, deleting a program will also delete samples. Make sure these really are unwanted
or have been saved to disk before proceeding.
The three 'action' keys are as follows:
Page 30
key. Pressing this key displays this screen:
Pressing this will display this prompt:
and you should press GO or ABORT as necessary.
If the program is the only one in memory using a particular set of samples,
you will receive the following prompt:
Press the appropriate soft key if you are sure that you want to delete the
program and its associated samples.
If the samples contained in the program are used elsewhere in other
programs, you will not receive this prompt as it is assumed you don't want
to lose these samples.
This will delete all programs which have the same number as the
highlighted program. You will be asked if you want to proceed with the
bulk program delete. If these programs are the only ones using particular
samples, you will be asked if you want to delete the samples as well.
This, of course, is the most drastic of these three options. If you answer
GO and YES to the questions regarding released samples, then all
programs, (except for an S3000XL generated program - TEST
PROGRAM) and samples will be deleted. Deleting samples and
rearranging memory space may take a little time, so be patient while this
takes place.
S3000XL Operator's Manual