Table of Contents
Advertisement
EDIT SAMPLE
The soft keys along the bottom are:
We will come to these in a moment.
Page 126
This indicates you are on the sample select page. Press this to switch
between sample points and millisecond displays.
This takes to you to the TRIM page where you may edit the start and end
of a sample.
This takes you to the LOOP page where you may set loops for the
sample..
This takes you to the gain normalise page where you may set the
sample's level to its maximum thereby getting the best signal to noise ratio
and dynamic range out of the sampler.
This takes you to the DIGITAL SIGNAL PROCESSING pages where you
may timestretch or re-sample the sample or apply EQ.
This offers a set of further editing functions where you may perform
'sectional' editing (that is, remove sections from samples), join, splice, mix,
tune and reverse samples and set fades.
This allows you to delete samples from memory.
S3000XL Operator's Manual
Advertisement
Table of Contents
