Table of Contents
Advertisement
SAMPLE
If you press GO or when the threshold is exceeded or the MIDI note is received, the
S3000XL will start recording and you will get a display something like the following:
This indicates that the S3000XL is recording digitally. As with analogue recording, the
display fills with the incoming sound's waveform.
NOTE: The S3000XL has difficulty recording at 48kHz (i.e. from a DAT machine). You will
receive the following warning if you try to record at 48kHz:
It is advisable not to record at 48kHz.
Having successfully made your recording(s), analogue or digital, we can now move on to
sample editing.
But first...
It is good practice to repeatedly save your work as you go - all good programmers do this
and it is a good habit to get into. You may make a mistake and accidentally record over a
precious new sample, you may trip over the power cord and disconnect the mains, you
may have a power cut - these things do happen!!
Page 124
** SAVE YOUR SAMPLES TO DISK NOW **
S3000XL Operator's Manual
Advertisement
Table of Contents
