The Second Filters - Akai S3000XL User Manual

THE SECOND FILTERS

If the IB304F filter bank is installed in your S3000XL, the second bank of filters is
accessed by pressing
NOTE: If the IB304F is not installed, pressing
Essentially, this looks very similar to the Filter 1 page except you will notice the extra
offers four different types of filters: LOWPASS, BANDPASS and HIGH PASS plus a
special EQ filter selection. The lowpass filter we have already seen and offers this type of
response graph:
Here, high frequency components above the cutoff frequency are removed and only lower
frequency components will pass through the filter. When the resonance control is
increased, the area around the cutoff frequency is boosted to give synthesiser effects.
The band pass selection offer this type of response slope:
Here, frequencies below the cutoff and above are removed. You may simultaneously
remove depth and top end using this selection and the result is a buzzy, thinner type of
S3000XL Operator's Manual
. This will display the following screen:
parameter that selects these filters' different modes. The second filter
ROLL-OFF SLOPE
L
E
V
E
L
FREQUENCY
ROLL-OFF SLOPE CUTOFF FREQUENCY
L
E
V
E
L
FREQUENCY
EDIT PROGRAM - SINGLE
will will show this message:
CUTOFF FREQUENCY
HARMONICS
HARMONICS
Page 103