Loading From Hard Disk - Akai S3000XL User Manual

LOAD

LOADING FROM HARD DISK

In the main LOAD page, select the media you wish to load from (i.e. hard disk). You will
see something like this screen:
To select the partition to load from, place the cursor on the partition field and use the
DATA wheel to select the partition. Now move the cursor to the
volume you wish to load from.
NOTE: You may, if you wish, press F2 -
volumes and select a volume to load from:
You may scroll through the list of available volumes on the current partition. If the volumes
have been named, you will see the names of the volumes (otherwise, the volume name
will show VOLUME ??? where ? is the default, unnamed volume number (it is good
practice to name volumes to keep better track of things when loading - see SAVE -
RENAME for information on naming volumes).
When you have selected the one you wish to load from, press F1 -
you to the main LOAD screen for the selected volume.
In the main LOAD page, move the cursor to the
wheel to make your selection from the options listed above. Now, either press CLR or
GO as you wish. Pressing
memory, and then load the chosen file(s) from disk (BE CAREFUL NOT TO ERASE
ANYTHING YOU WANT TO KEEP THAT HASN'T BEEN SAVED TO DISK!!). You will
receive this prompt to check you want to clear the memory:
You should make the appropriate NO or YES response. Pressing
chosen file(s) into memory without deleting anything first. As the disk is being loaded you
will receive something like the following display to keep you aware of progress:
Page 220
- to see a list of the selected partition
(CLEAR) will delete all programs and samples from
field and select the
- which will take
field and use the DATA
will load the
S3000XL Operator's Manual