Table of Contents
Advertisement
APPENDIX 4
You may, of course, save other items to the FlashROM and you may choose:
MULTI
ALL PROGS+SAMPLES
IND P+S
ALL PRG
ALL SMP
ITEM
SYSTEM
Once the data is saved, that's it. Assuming you saved some data to the AUTOLOAD
volumes, this will be loaded automatically on power up. As mentioned on the previous
page, assuming you have the correct ROM chip installed, on power up, the S3000XL
looks for a valid operating system in the BOOT SYSTEM volume. Once the o/s has been
loaded from the BOOT SYSTEM volume, it will then go off to see if any sound data is
stored in one or more of the AUTOLOAD 1-10 volumes. Assuming it finds data there, the
programs will be loaded and in a second or two, depending on the number of programs
saved, the S3000XL will be ready for use with your favourite sounds available for
playback.
Page 290
This will save the multi, its programs, samples and effects
to the selected FlashROM volume.
This will save all programs and samples but not the MULTI
or EFFECTS file (if the optional EB16 effects processor is
installed).
You can save an individual program and its samples and
the program you wish to save may be selected using the
inner DATA wheel.
This will save all the programs in memory only.
This will save all the samples in memory only.
You may select individual items (programs, samples, multi
and effects) and the item to be saved is selected using the
inner DATA wheel.
You may save the current operating system (this is best
saved to the BOOT SYSTEM volume).
S3000XL Operator's Manual
Advertisement
Table of Contents
