Env2 - Shaping The Filter - Akai S3000XL User Manual

ENV2 - SHAPING THE FILTER

Access to ENV2 is also via the KGRP or FILT page. However you arrive there, the screen
looks like this:
This is a 4-stage envelope generator with 4 rates going to 4 levels. Basically, Rate 1 goes
to Level 1, Rate 2 to Level 2, Rate 3 to Level 3 (which is also the sustain) and Rate 4
goes to Level 4. Again you have a choice of templates from which to choose a variety of
preset envelopes (probably a bit more necessary in light of the added complication of a
multi-stage envelope) and this works on the same principle as ENV1's templates except
that there are more of them.
Some of the possible envelope shapes you can create using envelope 2 are shown
below:
The second page of envelope parameters can be accessed by pressing
receive this screen:
Here we have similar parameters to ENV1.
S3000XL Operator's Manual
This sets how much velocity will determine the speed of
rate 1.
This sets how much the note-on velocity will affect the
speed of rate 4.
This sets the amount by which MIDI note off velocity will
affect the speed of rate 4.
This will set how much key position will affect both rate 2
and rate 4.
This sets how much velocity will control the modulation
output of ENV2. This parameter can be used very
effectively in regulating dynamics through key velocity. All
parameters' ranges are +/-50.
EDIT PROGRAM - SINGLE
. You will
Page 101