Icom ID-RP2 Service Manual page 8

SECTION 1
¤ GENERAL
• Power supply requirement
• Current drain
• Usable temperature range
• Dimensions (proj. not included)
• Weight (Approx.)
• Repeater control protocol
¤ LOCAL REPEATER INTERFACE
• Max. number of connections
• Communication speed
• Cable length (approx.)
¤ ASSIST REPEATER INTERFACE
• Max. number of connections
• Communication speed
• Cable length (approx.)
¤ WIRED INTER FACE
• Number of connector
• Type of connection
• MAC address
• IP address
All stated specifi cations are subject to change without notice or obligation.
SPECIFICATIONS
: 13.8 V DC ±15% (Negative ground)
: Less than 0.5 A
: –10˚C to +50˚C; +14˚F to +122˚F
: 483(W)×44(H)×257(D) mm; 19(W)×1
: 2.7 kg; 5 lb 15 oz
: Compatible to D-STAR standard
: 4
: Data
Voice
: 3 m; 10 ft (standard; supplied cable of the ID-RP2D/V)
: 2
: Data
Setting CPU communication 19.2 kbps
: 30 m; 100 ft (standard; supplied cable of the ID-RP2L)
: 1
: 10Base-T
: Unique ID
: Programmed with the utility
B - 1 - 1
3 1
⁄ (H)×10 ⁄ (D) in.
4 8
128 kbps
4.8 kbps
10 Mbps