Clock Setting; Alarm Operations - Jensen JiMS-125 Owner's Manual

Setting Clock Time
1. With the unit powered off, press & hold the TIME SET
then press the
time.
2. After the clock time is set, release the TIME SET
Setting Alarm Time
1. With the unit powered off, press & hold the ALARM SET
to display Alarm time, the alarm indicator
press the
2. After the alarm time is set, release the ALARM SET
3. Slide the ALARM wake to switch to select desired alarm sound
source.
(a) Wake to Buzzer ;
(b) Wake to iPod ----- Ensure the iPod is docked. Select the song or
playlist you wish to be woken up to.
(c) Wake to Radio ----- Ensure the desired radio channel is tuned.
4. Press the ALARM ON / OFF button to enable the alarm function.
The alarm indicator
5. If you selected "Wake to iPod" or "Wake to Radio".
Adjust to a desired alarm volume level by rotating the VOLUME knob.
Wake to Buzzer
When the desired alarm time is reached, the Buzzer will sound for one
hour.
Wake to iPod
When the desired alarm time is reached,
one hour.

CLOCK SETTING

(HOUR) /

ALARM OPERATIONS

(HOUR) / (MINUTE) buttons to set the alarm time.
stays on LCD display.
(MINUTE) buttons to adjust the clock
the iPod will begin playing for
10
button
button.
flashes on LCD; then
button.
button