Related Manuals for Jensen JiMS-215i
Summary of Contents for Jensen JiMS-215i
- Page 1 ® ® ® Docking Digital CD Clock Radio For iPod and iPhone USER MANUAL JiMS-215i (iPod/iPhone Not Included) PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
- Page 2 The serial number of this product is found on its bottom cover. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: JiMS-215i Serial Number:...
-
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. -
Page 4: Important Notes
19. Do not attempt to dismantle, open or repair this product yourself. If a fault occurs, seek advice from your local qualified service technician or contact the distributor via the telephone number at the back of this instruction manual. 20. The nameplate is located on bottom of product. IMPORTANT NOTES Avoid installing the unit in locations described below: ... -
Page 5: Compliance With Fcc Regulations
'feet' before you place the product on fine wooden furniture. PRODUCT FEATURES The JiMS-215i is an iPod/iPhone Docking Digital CD Clock Radio that incorporates the following features: Play and Charge your iPod nano, iPod touch, iPod classic, iPod video and iPhone. -
Page 6: Location Of Controls
LOCATION OF CONTROLS PUSH TO OPEN/CLOSE DOCK FOR iPod/iPhone 1. SNOOZE/SLEEP/DIMMER BUTTON 2. STANDBY BUTTON 3. FOLDER/PRESET - BUTTON 4. SLEEP BUTTON 5. FOLDER/PRESET + BUTTON 6. FUNCTION BUTTON (iPod/AUX/Tuner/CD) 7. CLOCK ADJUST/MEMORY/ENTER 8. ALARM BUTTON 9. PLAY MODE BUTTON iPod/iPhone SKIP BACKWARD ;... -
Page 7: Getting Started
This JiMS-215i is designed to operate on the included AC Adaptor. AC Adaptor Operation 1. Insert one end of the AC adaptor into the DC JACK on the back of JiMS-215i. 2. Connect the AC plug of the AC adaptor to an AC 120V~ 60Hz power source. - Page 8 The JiMS-215i features a “SYNC” Button that allows you to set the time using the internal clock of the iPod/iPhone. 1. With the JiMS-215i in iPod mode, dock an iPod/iPhone onto the 30 pin connector on the JiMS-215i. The authentication process will start and complete in a few seconds.
-
Page 9: Radio Operations
RADIO OPERATIONS TUNING THE RADIO Press to turn on the unit. The JiMS-215i will enter the iPod mode by default. To enter the TUNER mode press the FUNCTION Button twice. The FM station frequency will appear on the Display. Repeatedly press Buttons until a station is received. - Page 10 To store up to 20 FM station presets, repeat steps 1 to 4 above. Note: You can overwrite a preset station by storing the new frequency in its place. RECALL PRESET RADIO STATIONS Set the JiMS-215i to the Tuner mode. Repeatedly press the FOLDER/PRESET + or FOLDER/PRESET - Buttons recall the preset stations.
- Page 11 PLAYING AN APPLE iPod/iPhone CHARGING YOUR APPLE DEVICE The JiMS-215i will charge your iPhone or iPod when it is properly docked on the 30 pin Docking Connector. LISTENING TO MUSIC ON YOUR APPLE DEVICE The JiMS-215i works with all models of iPhone, iPod touch, iPod nano, iPod Video and iPod classic up to 160GB.
- Page 12 CD/MP3 OPERATION The JiMS-215i will not only play commercial CDs, but it also plays CD-R/RW discs. Because of the non-standardized format definition/production of CD-R/RW, playback quality & performance is not guaranteed. Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions such as PC performance, writing software, media characteristics, etc.
-
Page 13: Repeat And Random Play
previous folder. The first track no. of the selected folder will be displayed. ■ 11. To stop playing, briefly press the Button. REPEAT AND RANDOM PLAY To select the desired playback mode, press the MODE Button before or after playing the disc. - Page 14 CD PROGRAMMED PLAY For both CDs and MP3 CDs, up to 64 tracks can be programmed in your desired order. The same track can be programmed more than once. In Stop mode press the ENTER/MEMORY/CLOCK ADJ Button once. The Program Number “P-01”...
- Page 15 MP3 PROGRAMMED PLAY 1. In Stop mode, press the ENTER/MEMORY/CLOCK ADJ Button once. The Program Number “P-01” will briefly appear on the Display. Folder No. “F00” and the Program Indicator, “MEMORY”, will appear and flash on the Display. 2. Press the Buttons to select the desired folder (F02) while “F00”...
-
Page 16: Alarm Operations
Never use chemicals such as record cleaning sprays, antistatic sprays or fluids, benzene or thinner to clean compact discs. ALARM OPERATIONS Your JiMS-215i provides Wake to iPod, Radio, CD or Alarm. SETTING ALARM TIME Note: Alarm time can only be set in “POWER ON” mode after the current time is set. - Page 17 Press the ALARM Button again to confirm. The Display will show the chosen Alarm time and then revert to the current function mode. Press the STANDBY Button to turn JiMS-215i off. The alarm will beep when the set Alarm time is reached. Note:...
-
Page 18: Sleep Timer
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable. 2. Plug one end into the AUX IN Jack on the JiMS-215i and the other end of the cable into the Line-out Jack or Headphone Jack of your external audio device. -
Page 19: Care And Maintenance
CARE AND MAINTENANCE Avoid operating your unit under direct sunlight or in hot, humid or dusty places. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors. For better Clock Display clarity, avoid operating the unit under direct sunlight or in strong room illumination. - Page 20 Unit turned to CD or radio Select other modes for iPod charging. mode. Remove your iPod/iPhone from the dock and iPod/iPhone is not check for obstruction on the connectors in the iPod/iPhone installed properly. dock and on your iPod/iPhone. Then reseat it does not charge.
-
Page 21: Specifications
SPECIFICATIONS Power Requirement AC-DC adaptor Input: 120 V ~ 60 Hz Output: 9 V 2500 mA Frequency 88 – 108 MHz “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod and iPhone, respectively, and has been certified by the developer to meet Apple performance standards. - Page 22 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A.