Setting The Clock - Jensen JiLS-525iB User Manual

PRESET EQ AND TREBLE / BASS SETTINGS
The unit is designed for you to select the preset EQ and Treble / Bass settings.
When the unit is powered on (in iPod, Aux-In or Radio mode), you can select 4 preset EQ or
setting Treble / Bass as following steps.
TO SELECT PRESET EQ
1. Press the EQ button entering preset EQ mode.
2. Each press of the EQ button will scroll through following selection.
3. The selected preset EQ indicator will display few seconds.
TO SET TREBLE / BASS
1. Press and hold the EQ button to enter Treble setting mode.
The display shows the indicator "t" and the treble level digit.
2. Tap the TUNE + / - button to adjust to the desired Treble level.
3. Tap the EQ button again entering Bass setting mode.
The display shows the indicator "b" and the bass level digit.
4. Tap the TUNE + / - button to adjust to the desired Bass level.
5. Tap the EQ button to exit Bass / Treble setting mode.
SETTINGS
When the unit is OFF (Standby mode):
Set 12/24 Hour format
1. Tap the MODE button entering 12/24 hour format setting mode.
2. Tap the VOLUME + / - to select 12 or 24 hour display format.
Set Clock
3. Tap the MODE button again and the clock digits blink.
4. Tap the TUNE + / - button to set hour.
5. Tap the VOLUME + / - button to set minute.
Exit setting mode
6. To save all settings, tap the MODE button or wait for a few seconds to exit the setting
mode.

SETTING THE CLOCK

15