Clock Setting; Listening To The Radio - Jensen JiSS-115 Owner's Manual

The clock can only be adjusted and displayed in STANDBY mode.
1. Press the PROGRAM / CLOCK-ADJ. Button,
2. Press F-SKIP
3. Press the PROGRAM / CLOCK-ADJ. Button to confirm.
The Hour digit flashes.
4. Press F-SKIP
5. Press the PROGRAM / CLOCK-ADJ. Button to enter when the desired hour is shown.
The Minute digit flashes.
6. Press F-SKIP
7. Press the PROGRAM / CLOCK-ADJ. Button again to confirm when the correct time is shown in
the Display.
1. Press the POWER / STANDBY
2. Press the FUNCTION Button to select TUNER mode.
3. Set the BAND SWITCH to "AM" or "FM" for the desired radio band.
4. Tune to your desired station by turning the TURNING CONTROL.
The frequency of the tuned station will be displayed on the LCD Display.
The FM STEREO Indicator will light when a FM stereo program is received.
5. Adjust the Volume Control to obtain the desired sound level from the Built-in Speakers.
6. To turn the System off, press the POWER / STANDBY
off.
CD814 IPOD JENSEN IM 120V GB CUS8 8

CLOCK SETTING

or B-SKIP to select 12 or 24 hour format.
or B-SKIP to adjust the hour.
or B-SKIP to adjust the minute.

LISTENING TO THE RADIO

Button once to turn on the System. The LCD backlight will light.
FUNCTION
FM
BAND
AM
FM
TUNING
MHz
Button again. The LCD backlight will go
7
PROGRAM / CLOCK-ADJ.
2010/1/12 02:01:50