Clock Setting - Jensen JiMS-252i User Manual

W166-R(JiMS-252i)_GB_ES IB.indd 12 18 -
PRESET EQ AND BASS BOOST(REMOTE CONTROL ONLY)
Preset EQ
The unit provides 4 preset EQ settings for your selection.
To select the preset EQ [JAZZ , CLASSIC, ROCK, POP , (OFF)] in either radio, AUX (auxiliary) or iPod
mode, tap the EQ button from the remote control.
You can select the desired effect by tapping the "EQ" button on remote control repeatedly at following
sequence:
OFF JAZZ
Bass / Treble Adjustment
1. Press and hold EQ button from the remote control, "BASS" indicator displays. Tap the TUN + / -
/ button to increase or decrease bass level.
2. Tap the EQ button again, "TRE" indicator displays. Tap the TUN + / -
or decrease treble level.
3. BASS, TRE or BASS/TRE indicator will show on display if you have set their level other than "0".
Bass Boost function
If necessary, you can enhance the bass boost effect by tap the BASS BOOST button from the remote control.
1. Tap the BASS BOOST button once, it will cancel your previous EQ setting and jump to bass boost
effect immediately. "BASS" indicator will display.
2. Tap the BASS BOOST button again, it will resume to your previous EQ setting. "BASS" indicator
will disappear form display.
Note:
- Only either one of "Preset EQ", "Bass/Treble" or "Bass Boost" sound effect operates at a time.
- If you have set bass effect in Bass/Treble Adjustment section, "BASS" indicator will be always
showing on the display even you tap the BASS BOOST button.

CLOCK SETTING

When the unit is in standby mode,
Set 12/24 Hour format
1. Tap the MODE button once entering 12/24 hour format setting mode.
2. Tap the VOLUME +/- button to select 12 or 24 hour display format.
Set Clock
3. Tap the MODE button again and the clock hour and minute digits blink.
4. Tap the TUN +/- / button repeatedly to set hour. Press and hold the buttons to speed the
forward or reverse scanning of the digits.
Note: Make sure the hour is set so that the AM or PM indicators are displayed correctly.
5. Tap the VOLUME +/- button repeatedly to set minute. Press and hold the buttons to speed the
forward or reverse scanning of the digits.
Exit setting mode
6. Tap the MODE button after clock set, radio region will blink & default setting is "USA".
7. To save all settings without change radio region and exit the setting mode, tap the MODE button
twice or wait for a few seconds.
size:148x210mm,80gms book paper,BK+BK.
12 25 2012-2-28 8:36
GB
The corresponding indicator shows on display.
CLASSIC ROCK POP
/ button to increase
12
ES