Connecting The Ac Power Cord; Remote Control Battery Installation; Clock Setting - Jensen JiTS-300i User Manual

CONNECTING THE AC POWER CORD

After connecting the speakers fully unwind the AC power cord and connect it to any convenient
household 240V~ 50Hz AC outlet.

REMOTE CONTROL BATTERY INSTALLATION

The remote control operates on 2 X AAA (UM-4) batteries (included).
1.) Open the battery compartment cover.
2.) Insert two "AAA" (UM-4) batteries (included) and observe the
polarity as indicated inside the battery compartment when
installing.
3.) Replace the cover.
NOTE: Only use a well-known brand of battery to ensure
the longest life and best performance.
Battery Precautions
Replacement of batteries must be done by an adult.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
The supply terminals are not to be short-circuited.
Non-rechargeable batteries are not to be recharged.
Exhausted batteries are to be removed.
Only batteries of the equivalent type are to be used.
Batteries are to be inserted with the correct polarity.
Dispose of batteries properly. Do not dispose of batteries in fire. The batteries
may explode or leak.
TO SET THE TIME USING iPhone / iPod TIME SYNC (with remote control)
After plugging in the AC adaptor power, "12:00" will appear and start blinking in the
LCD display. If you have an iPod or iPhone with the correct time showing, you can dock
it securely into the Docking Bay to take advantage of Time Sync feature.
Note: older iPod models such as iPod mini do not support this feature.
1. When "12:00" is flashing on the LCD display after the initial power connection, insert

CLOCK SETTING

2