Related Manuals for Jensen JiMS-520i
Summary of Contents for Jensen JiMS-520i
- Page 1 Docking System for iPod® and iPhone™ Owner’s Manual JiMS-520i (iPod and iPhone Not Included) Please read this Instruction Manual carefully before using the unit and retain it for future reference...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET REFER SERVICING TO QUALIFIED PERSONNEL ONLY. The Caution marking is located at the bottom of the unit The rating plate is located at the bottom of the unit CAUTION:...
- Page 3 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. IMPORTANT SAFETY INSTRUCTIONS 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
- Page 4 This Class B digital apparatus complies with Canadian ICES-003. FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-
Page 5: Table Of Contents
WELCOME! ... 5 PROTECT YOUR FURNITURE ... 5 ABOUT THIS MANUAL ... 5 LOCATION OF CONTROLS... 5 FRONT VIEW... 5 REAR VIEW ... 6 DISPLAY UNIT... 6 REMOTE CONTROL UNIT... 7 GETTING STARTED ... 8 UNPACKING THE DOCKING SYSTEM ... 8 USING THE FM &... -
Page 6: Welcome
Thank you for purchasing the JENSEN JiMS-520i Docking System. Before operating the unit, please read this manual thoroughly and retain it for future reference. This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. -
Page 7: Rear View
8. SNOOZE/LIGHT Button 9. Play/Pause Button Rear View 1. AC INPUT SOCKET 2. FM Antenna Wire 3. S-VIDEO OUT (iPod/iPhone) 4. AUX IN Jack Display Unit 1. SLEEP Indicator 2. ALARM 1 Wakeup Mode Indicator 3. ALARM 2 Wakeup Mode Indicator 4. -
Page 8: Remote Control Unit
Remote Control Unit Turns the System On/Off POWER Selects AM or FM Band BAND Selects Radio, iPod or Aux Mode FUNCTION 0 – 9 Numeric Buttons ▲ Set & Access Stored Stations Up PRESET STATIONS ▼ Set & Access Stored Stations Down PRESET STATIONS Equalizer Options Programs Preset Stations... -
Page 9: Getting Started
AUX IN Connection Plug one end of the included cord into the AUX IN jack on the back of JiMS-520i. Plug the other end of the cord into your external audio player, such as an iPod shuffle, CD, MP3 Player etc. -
Page 10: Replacing The Remote Control Battery
Do not dispose of battery in fire, battery may explode or leak. The following procedures can be accomplished by using either the Remote or the controls on JiMS-520i. Listening To The Radio 1. Press the Button to turn on the unit. -
Page 11: To Preset Stations
JAZZ, BASS or NORMAL equalization to suit your taste. To Preset Channels The JiMS-520i is equipped with 20 preset memories each for the AM and FM band. Once they are preset, they can be instantly accessed by keying in the preset channel using the Numeric Buttons or ▲... -
Page 12: Aux Operation
1. Plug one end of the included cord into the AUX IN jack on the back of JiMS-520i. Plug the other end of the cord into your external audio player, such as an iPod shuffle, CD, MP3 Player etc. -
Page 13: Ipod Adaptors
iPod ADAPTORS Below are the iPod Adaptors included in the package. It is always recommended you use the adaptor that comes with your iPod first. This will help maximize a custom fit for your iPod when docked. iTouch & iPhone TABLE 1... -
Page 14: Docking Your Ipod
“IPOD” will be shown on the Display after the verification has completed. The iPod will start playing and charging automatically. Adjust the sound level by pressing the VOLUME +/- buttons on the JiMS-520i. Note : The volume level cannot be adjusted using the volume control on your iPod after being docked. -
Page 15: Docking Your Iphone
“IPOD” will be shown in the Display after the verification has completed. 5. The iPhone will start playing and charging automatically. 6. Adjust the sound level by pressing the VOLUME +/- buttons on the JiMS-520i. Note: The volume level cannot be adjusted using the volume control on your iPhone after being docked. -
Page 16: Connecting And Viewing The S-Video Out (Ipod)
For Video View (For iPhone with video ONLY) You can connect your JiMS-520i to a TV or other video display that has S-Video input. 1. Plug one end of the included S-VIDEO cable into the S-VIDEO OUT Jack located on the back panel and the other end into the VIDEO IN of your TV or video display. -
Page 17: Using Headphones
Press the SET button to exit and activate the new clock time to operate. Setting the Alarm (s) JiMS-520i allows you to set two different wake-up times which can be used independently or simultaneously ALARM1 or ALARM2 or ALARM1 and ALARM2. -
Page 18: Clock Light Operation
Indicator of the Wakeup mode flashes. The alarm will continue to sound and last for 60 minutes and then turn off automatically. The alarm remains set and will turn JiMS-520i on again at the same time on the following day. -
Page 19: Snooze Operation
If you have chosen “Wake to RADIO” alarm mode, make sure that you have tuned to a station and adjusted the volume to a comfortable level. If “Wake to iPod” alarm mode is selected, make sure that there is an iPod docked in the System and the volume is set to a comfortable level. -
Page 20: Sleep And Wake To Alarm, Ipod Or Radio
Display. Deactivating the SLEEP Timer If you want to exit the SLEEP mode simply press either the ALARM 1 or ALARM 2 button once. SLEEP AND WAKE TO ALARM, iPod OR RADIO Refer “SETTING THE ALARMS” in above to set the desired wakeup time (s), wakeup mode, i.e. ALARM, iPod or RADIO and volume level. -
Page 21: Troubleshooting Guide
If you experience difficulties in the use of this Docking System, please check the following or call 905-845-6200 for Customer Service. Symptom AC cord is not plugged properly into a wall outlet or the connector is not The unit does not plugged into the AC IN jack on the respond (no power) back of the unit. -
Page 22: Specification
Oakville, ON. L6K3R7 Email: www.targetmarketingcorp.com Please have model number ready, for Customer Service, call 905-845-6200 General Power FUNCTION: Dimensions: Weight: Radio Frequency Coverage Speakers: Output Power: iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc.