Related Manuals for Jensen JiMS-125
Summary of Contents for Jensen JiMS-125
- Page 1 ® DOCKING DIGITAL MUSIC SYSTEM FOR iPod OWNER'S MANUAL JiMS-125 ® (iPod Not Included) PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE...
-
Page 2: Table Of Contents
TABLE OF CONTENTS DEAR JENSEN CUSTOMER ® IMPORTANT SAFETY INSTRUCTIONS COMPLIANCE WITH FCC REGULATIONS PRODUCT FEATURES INSTALLATION LOCATION OF CONTROLS CLOCK SETTING ALARM OPERATIONS RADIO OPERATIONS iPod DOCKING AUXILIARY INPUT CARE AND MAINTENANCE TROUBLESHOOTING GUIDE SPECIFICATIONS SERVICE "Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. -
Page 3: Dear Jensen Customer
The serial number of this product is found on its bottom cover. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: JiMS-125 Serial Number:... -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. - Page 5 10.Overloading Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire of electric shock. 11.Damage Requiring Service This unit should be serviced by qualified service personnel when: A.The power supply cord or plug has been damaged. B.Objects have fallen into or liquid has been spilled into the enclosure.
-
Page 6: Compliance With Fcc Regulations
COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 7: Product Features
PRODUCT FEATURES JiMS-125 is an iPod Docking Music System which incorporates the following features : • iPod , iPod mini, iPod classic, iPod touch and iPod nano Player / Re-charger • AM / FM Stereo receiver with digital read out on LCD •... -
Page 8: Installation
Clock setting battery back-up The battery back-up compartment is located on the back of the unit. (1) Remove the battery compartment door. (2) Follow the polarity diagram shown inside the compartment and install 2 x AAA batteries (not included) . (3) Replace the battery compartment door. -
Page 9: Location Of Controls
LOCATION OF CONTROLS Main Unit Top view 11 10 1. iPod docking station 2. iPod docking connector 3. Function switch : Power Off ; select RADIO / iPOD / AUX modes. 4. Band switch : Select between FM STEREO / FM (mono) / AM 5. - Page 10 18. DC-in jack : For the connection of external DC power supply 19. FM Antenna wire 20. Battery Compartment 21. RESET button : Reset the unit. LOCATION OF CONTROLS Remote Control (for iPod only) 1. Infra-red Transmitter 2. iPod PLAY / PAUSE button ----- In iPod mode, skip tracks or perform 4.
-
Page 11: Clock Setting
Setting Clock Time 1. With the unit powered off, press & hold the TIME SET then press the (HOUR) / time. 2. After the clock time is set, release the TIME SET ALARM OPERATIONS Setting Alarm Time 1. With the unit powered off, press & hold the ALARM SET to display Alarm time, the alarm indicator press the (HOUR) /... - Page 12 Wake to Radio If the BAND switch is set to FM or AM mode then the radio will turn on and play for one hour when the desired alarm time is reached. Caution: The clock and alarm settings may be affected/lost if the AC adaptor is unplugged or if you experience a power outage.
-
Page 13: Radio Operations
RADIO OPERATIONS Radio Operation Unwrap and fully extend the FM Antenna wire for the best reception. 1. Slide the FUNCTION switch to RADIO mode. 2. Slide the BAND switch to select FM Stereo / FM or AM band. 3. Rotate the TUNING knob and tune to a desired station. 4. -
Page 14: Ipod Docking
If the docking port will not be used for an extended period of time, it is recommended to cover the docking port by using the “Dock Cover” insert (included). 1. Use the iPod adaptor included in your iPod and insert it into the docking area. -
Page 15: Auxiliary Input
The unit provides the auxiliary audio signal input for the connection of an external audio device. You may connect an audio cable with 3.5 mm stereo plug (not included) to the AUX IN Jack located at rear of the unit. Connect the other end of the cable to a Line Out Jack or Headphone Jack of your non-dockable MP3 player, CD player and other, non-dockable iPods then listen to your external source through the speakers of this system. -
Page 16: Care And Maintenance
CARE AND MAINTENANCE • Do not subject the unit to excessive force, shock, dust or extreme temperature. • Do not tamper with the unit's internal components. • Clean your unit with a damp (never wet) cloth. Solvents or detergents should never be used. -
Page 17: Troubleshooting Guide
TROUBLESHOOTING GUIDE Symptom AC Adaptor is not plugged into a wall outlet or the connector is not The unit does plugged into the power supply jack not respond (no power) on the back of the unit. Wall outlet is not functioning. Using no/wrong iPod Adaptor. -
Page 18: Specifications
SPECIFICATIONS Power Requirement Main unit DC input: DC10V, 1000mA Battery back up for clock: 2 X DC1.5V 'AAA' (UM-4) Batteries Remote Control 1 X CR2032 Lithium Battery Frequency Range Radio AM 530 -1710 kHz FM 88 -108 MHz SERVICE Please refer to the instructions on the enclosed warranty card for returning your unit for service.