Warning Lights; Auto Check Control - Skoda Octavia Owner's Manual

or
SERVICE IN... km OR ... DAYS
Resetting Service Interval Display
After resetting the display with flexible service intervals, the displayed data is the
same as that for a vehicle with fixed service intervals. We therefore recommend
that the Service Interval Display is only reset by a ŠKODA Partner, who will reset
the display with a vehicle system tester.
The ŠKODA Partner:
›
Resets the memory of the display after the appropriate inspection
›
Adds an entry to the Service Schedule
›
Affixes the sticker with the entry of the following service interval to the side of
the dashboard on the driver's side.
It can be reset with the button » Fig. 2
6
›
Switch off the ignition.
›
Press the button and keep it pressed down.
6
›
Switch on the ignition.
›
Release the button and press again.
6
CAUTION
We recommend that you do not reset the Service Interval Display yourself as this
can result in the incorrect setting of the Service Interval Display, which can also
cause possible problems with the operation of your vehicle.
Note
Information is retained in the Service Interval Display even after the vehicle bat-
■
tery is disconnected.
If the instrument cluster is exchanged after a repair, the correct values must be
■
entered in the counter for the Service Interval Display. This work is carried out by
a ŠKODA specialist garage.
For more information on the service intervals
■
12
Using the system
on page 9.
» Service Plan.

Warning lights

Auto Check Control

Certain functions and conditions of individual vehicle systems are checked contin-
uously when the ignition is switched on.
Error messages and/or other information are displayed in the instrument cluster
display. The messages are displayed at the same time as the symbols in the dis-
play and/or the warning lights
Depending on the meaning, the icon
in the bar with the warning lights
Symbol


While the operational faults remain unrectified, the messages are always indica-
ted again. After they are displayed for the first time, the symbols
to be indicated without any extra messages for the driver.
WARNING
If you have to stop for technical reasons, then park the vehicle at a safe dis-
tance from the traffic, switch off the engine and activate the hazard warning
light system » page 49. The warning triangle must be set up at the prescri-
bed distance - observe the national legal provisions when doing so.
Overview

The warning lights show the following functions/faults and may be accompanied
by audible signals.
When switching on the ignition, some indicator lights illuminate briefly as a func-
tion test. These indicator lights will disappear several seconds after the vehicle is
started.
» page 12.
or together with the message appears
 
» Fig. 2 on page 9.
5
Description
Warning
Danger

or continue


