Replacing the windscreen wiper blades
First read and observe the introductory information and safety warn-
ings
on page 53.
Before replacing the windscreen wiper blade, put the windscreen wiper arms into
the service position.
Service position for changing wiper blades
›
Closing the bonnet.
›
Switch the ignition off and on again.
›
Within 10 seconds, press the lever in position
seconds
» Fig. 38
on page 54.
The windscreen wiper arms move into the service position.
Removing the wiper blade
›
Raise the windscreen wiper arm away from the windscreen
›
Tilt the wiper blade as far as it can go in the direction of the windscreen wiper
arm - arrow
.
A
›
Hold the upper part of the windscreen wiper arm and unlock the securing mech-
anism
.
1
›
Remove the wiper blade in the direction of the arrow
Attaching the wiper blade
›
Push the windscreen wiper blade until the stop and it locks in place.
›
Check that the wiper blade is correctly attached.
›
Fold the wiper arms back to the windscreen.
›
Turn on the ignition and press the lever into position
The windscreen wiper arms move into the home position.
56
Using the system
Fig. 39
Windscreen wiper blade
and keep it held for around 2
4
» Fig.
39.
.
B
» Fig. 38
on page 54.
4
Replacing the rear window wiper blade
First read and observe the introductory information and safety warn-
ings
on page 53.
Removing the wiper blade
›
Raise the windscreen wiper arm away from the windscreen
›
Tilt the wiper blade as far as it can go in the direction of the windscreen wiper
arm - arrow
.
A
›
Hold the upper part of the windscreen wiper arm and unlock the securing mech-
anism
.
1
›
Remove the wiper blade in the direction of the arrow
Attaching the wiper blade
›
Push the windscreen wiper blade until the stop and it locks in place.
›
Check that the wiper blade is correctly attached.
›
Fold the wiper arm back to the windscreen.
Rear mirror
Introduction
This chapter contains information on the following subjects:
Interior mirror
Exterior mirror
Fig. 40
Rear window wiper blade
» Fig.
40.
B
.
57
58