Cup Holder - Skoda Octavia Owner's Manual

Attachment points
Fig. 59 Attachment points for roof bars

First read and observe the introductory information and safety warn-
ings on page 68.
Installation location of the attachment points for roof bars
Front attachment points
A
Rear attachment points
B
Perform the assembly and disassembly according to the enclosed instructions.
CAUTION
Observe the information regarding the assembly and disassembly in the enclosed
instructions.
Roof load

First read and observe the introductory information and safety warn-
ings on page 68.
The maximum permissible roof load (including roof rack system) of 75 kg and the
maximum permissible total weight of the vehicle should not be exceeded.
The full permissible roof load cannot be used if a roof rack system with a lower
load carrying capacity is used. In this case, the roof rack system must only be loa-
ded up to the maximum weight limit specified in the fitting instructions.

Cup holder

Fig. 60 Cup holder: in the front centre console/in the rear armrest
Two beverage containers can be placed into the cup holders/recesses.
Cup holder in front centre console
A
» Fig. 59: Cup holder in rear armrest
B
Removable element
C
Removable element
D
You can change the size of the individual openings using the removable elements
and
C
WARNING
Never put hot beverage containers in the cup holder. If the vehicle moves,
 ■
they may spill – risk of scalding!
Do not use any cups or beakers which are made of brittle material (e.g. glass,
■
porcelain). This could lead to injuries in the event of an accident.
CAUTION
Do not leave open beverage containers in the cup holder during the journey.
There is a risk of spilling e.g. when braking which may cause damage to the elec-
trical components or seat upholstery.

.
D

69
Seats and Stowage