Skoda Octavia Owner's Manual page 63

Reducing or increasing the curvature of the lumbar support
›
Push the switch » Fig. 45 in the region of one of the arrows 2.
A
Raising or lowering the curvature of the lumbar support
›
Push the switch » Fig. 45 in the region of one of the arrows 1.
A
The adjusted driver's seat position can be set in the memory of the
seat » page 61 or the remote control key
Note
If the setting procedure is interrupted, you will need to press the button again.
Memory function of the power seat

First read and observe the introductory information and safety warn-
ings on page 59.
The memory function for the driver's seat provides the option to store the posi-
tions of the driver's seat and the external mirrors. Each of the three memory but-
tons » Fig. 47 can be assigned a set position.
B
Storing seat and exterior mirror settings for driving forward
›
Switch on the ignition.
›
Adjust the seat to the desired position.
›
Adjust both of the exterior mirrors
›
Press the button » Fig. 47.
SET A
›
Within 10 seconds after pressing the
button .
B
An acknowledgment sound confirms the storage.
» page 61.
Fig. 47
Memory buttons and SET button
» page 58.
button, press the desired memory
SET
Saving front passenger mirror settings when reversing
›
Switch on the ignition.
›
Press the required memory button
›
Move the rotary knob for the exterior mirror control into position 
›
Engage reverse gear.
›
Move the right exterior mirror into the desired position
›
Take the vehicle out of gear.
The set position of the exterior mirror is stored.
Retrieving the saved setting
›
Tap the desired memory button

and the driver's door is opened.
›
Press down on the desired memory button
and the driver's door is closed.
Stopping the ongoing adjustment
›
Press any button on the driver's seat or the button
key.
Note
Each time you store the seat and exterior mirror settings for driving forward you
also have to re-store the setting of the exterior mirror on the passenger side for
reversing.
Memory function of the remote control key

First read and observe the introductory information and safety warn-
ings on page 59.
The automatic storage function of the driver's seat and exterior mirrors position
when locking the vehicle can be activated in the memory of the remote control
key.
When this function is activated, each time the vehicle is locked, the current posi-
tions of the driver's seat and the external mirrors are saved in the memory of the
remote control key. After subsequently unlocking the vehicle with the same key,
the driver's seat and the exterior mirrors assume the positions stored in the
memory of this key.
This function can also be activated/deactivated in the Infotainment
sanleitung Infotainment, chapter operating instructions for InfotainmentSetting
vehicle systems (CAR button).
» Fig. 47.
B
» page
» page 58.
» Fig. 47 when the ignition is switched off
B
when the ignition is switched on
B
on the remote control

»
Seats and Stowage
58.

Bedienung-

61