Specifications And Engine Oil Capacity - Skoda Octavia Owner's Manual

Specifications and engine oil capacity

The engine has been factory-filled with a high-grade oil that can be use through-
out the year - except in extreme climate zones.
The engine oils are undergoing continuous further development. Thus the infor-
mation stated in this Owner's Manual is only correct at the time of publication.
ŠKODA Partners are informed about the latest changes by ŠKODA. We therefore
recommend that the oil change is completed by a ŠKODA Partner.
The specifications (VW standards) stated in the following can be indicated sepa-
rately or together with other specifications on the bottle.
The oil capacities include oil filter change. Check the oil level when filling; do not
over fill. The oil level must be between the markings
Specifications and capacity (in l) for vehicles with flexible service intervals
Petrol engines
1.2 ltr./63 kW TSI
1.4 ltr./103 kW TSI
1.8 ltr./132 kW TSI
Diesel engines
1.6 ltr./77 kW TDI
2.0 ltr./110 kW TDI
Specifications and capacity (in l) for vehicles with fixed service intervals
Petrol engines
1.2 ltr./63 kW TSI
1.4 ltr./103 kW TSI
1.8 ltr./132 kW TSI
Diesel engines
1.6 ltr./77 kW TDI
2.0 ltr./110 kW TDI
» page 172.
Capacities (in li-
Specification
tres)
4.0
VW 504 00
5.2
Capacities (in li-
Specification
tres)
VW 507 00 4.6
Capacities (in li-
Specification
tres)
4.0
VW 502 00
5.2
Capacities (in li-
Specification
tres)
VW 507 00 4.6
CAUTION
If the above engine oils are not available, a different engine oil can be used in
■
an emergency. To prevent damage to the engine, a max. 0.5 l only of the follow-
ing engine oils may be used until the next oil change:
For petrol engine models: ACEA A3/ACEA B4 or API SN/API SM;
■
For diesel engine models: ACEA C3 or API CJ-4.
■
Note
Before a long drive we recommend that you purchase and carry with you engine
■
oil which complies with the specification for your vehicle.
We recommend that you use oils from ŠKODA Original Accessories.
■

209
Technical data